192.168.0.1 is set by the manufacturer at the factory as the router’s default IP address to access the administration console (such as D-Link, Netgear models), you can change it at any time using the network router’s administrative console. 192.168.0.1 IP address is the first place you go if you experience any networking problems. All manufacturers use one default username and password for their routers, so 192.168.0.1 admin is recommended to change the password once you set up your network.
Don’t Miss: 192.168.l.l Router Login
Any brand of router, or any computer on a local network for that matter, can be set to use 192.168.0.1 or a comparable private IPv4 address.
192.168.0.1 Default Router Admin Login Password:
The popularity of 192.168.0.1 is also attributable to the manufacturers. IP address 192.168.0.1 is considered private as it falls within the range 192.168.0.0 up to 192.168.255.255 which are IP addresses issued to computers and devices on a single network. All these IPs can’t be accessed from the Internet (Network Address Translation (NAT) is required for Internet communication). The private IPs can be used in a network, and it is good to know that only one device can have this IP 192.168.0.1.
The address 192.168.0.1 is also referred to as a gateway address, with the gateway meaning network access point (the router).
192.168.1.254 IP Address Login Page:
192.168.1.254 represents a private 32-bit IPv4 address, class C and it is a default ip address for a large number of routers, such as Billion ADSL routers, Thompson ADSL routers, Linksys SRW2024, Westell modems and 3Com routers. 192.168.1.254 is a private IP address since it fits into IP range which is reserved from IANA as a private range.
192.168.1.254 private IP address is installed on most of the routers by the manufacturers. Although this address is set by the manufacturer at the factory, it can be changed at any time through administrator console.
Also See: 192.1681.254 IP Address
Any device on a local network can be set to use it, but only one device on the network should use 192.168.1.254 at a time to avoid address conflicts. Default username and password is “admin” and can also be changed.