192.168.1.254 is the default IP addresses used by various router manufacturers such as Belkin and SMC for certain models of broadband routers. It is categorized as “private” since it falls within the IP address range of 192.168.0.0 through 192.168.255.255. It means that in a network only one can exist, and it can’t be accessed from outside the network.
The purpose and usability of this IP address is not different than of other private IP addresses. Since private IP addresses can be used over and over again (as long as they are on different networks) 192.168.1.254 is a common IP address that many home networks use to establish a default gateway.
Must Check: 192.168.1.1 Login Page
How to Setup and Configure 192.168.1.254 Wireless Router:
This is quite helpful when you don’t know the IP of your router, so running the ipconfig command in the Command prompt will reveal it. If you are not familiar with this. You can login the router’s console by pointing a Web browser to http://192.168.1.254.
192.168.1.100 is the first default dynamic IP address range for some Linksys routers. It is an IPv4 address and private IP address which is often used on local area networks. This means the first computer (or other device) you attach to a Linksys router will typically be assigned the address 192.168.1.100 by DHCP.
This address is a private IP address that you can assign manually (statically) to a computer on the local network. It is a part of reserved IP range for private uses. To avoid address conflicts, do not use 192.168.1.100 as a static IP address if it is also part of the router’s DHCP range.
If you are part of some LAN or you have built your own LAN with Linksys router your computer can get assigned 192.168.1.100. 192.168.1.100 IP is not available on internet. If computer with this IP want to connect to internet it must be redirected through a router or another computer.
192.168.1.254 is the default IP address used by some private home network of computers and routers (typically outside of the United States). 192.168.1.254 can be a Gateway or an IP address. 192.168.1.254 is typically set as default IP address by the manufacturer for some Philips, Senao and a few other routers.
Read More: 192.168.o.1 IP Address
192.168.1.254 is a private IP address is that they can not make your computer recognizable outside your home or office network (or on the Internet). But you can use the router’s public IP address to connect to a router from outside the home network.
If taken to consideration all the threats coming from the Internet, it turned out that the private IP addresses are pretty useful stuff in this point.
Using 192.168.1.254 to Connect to a Router is same as 192.168.1.1.